Alderlea T5 Instructions d'exploitation télécharger pdf (Page 21)

ALT5.ASCINSB 150714-24

©PACIFIC ENERGY FIREPLACE

PRODUCTS LTD.

Troubleshooting

Problem Cause Cure

Excessive Creosote 1) Wood is too wet - Use dry wood

Buildup

2) Turning down air control - Do not turn down until:

too soon a) there is a good bed of coals

b) the wood is charred

3) Draft too low - Improper chimney height and/or diameter

- Chimney plugged or restricted, check  ue

- Provide outside air for combustion

Glass is Dirty 1) See 1, 2, and 3 above

2) Door Gasket leakage - Replace gasket

- Check latch

Low Heat Output 1) Wood is wet - Use dry wood

2) Fire too small - Build a larger  re

3) Area too large

4) Poor insulation or open concrete

Won't Burn Overnight 1) Air control set too high - Set control lower

2) Not enough wood - Unsplit wood is preferred for overnight burns

3) Possible air leak - Door gasket needs changing

Stove Won't Burn 1) Combustion air supply - Check outside air supply for obstructions

is blocked (see Combustion Air section)

2) Draft too low - Chimney plugged or restricted

Inspect and clean

- Chimney oversized or otherwise unsuitable

Consult Dealer

1 2 ... 16 17 18 19 20 21 22 23 24

Pas de commentaire

Alderlea T5 Instructions d'exploitation Page 21